Product no longer for sale. Pricing and information may not be accurate.

Try using our search feature for similar products

Wilson Combat Competition Match Trigger, Long Pad

Price : -

Brand: Wilson Combat
Model: 1
UPC: 874218000011
Availability: Out Of Stock

Wilson Combat 1911 Trigger Silver Competition Match 1

This is our best selling trigger combining all of the features necessary for a clean crisp trigger pull.

Wilson Three-Hole Serrated Aluminum Pad
Matte Silver Finish On Pad
Blued Steel Bow
Over-Travel Adjustment Screw
No Fitting Required

The Competition Match Trigger features the Wilson three-hole serrated aluminum pad in a matte silver finish with over travel adjustment screw and a blued steel bow. No fitting required.

NOTE: Wilson Combat triggers are skeletonized to reduce "trigger bounce" which is rough on a fine trigger job and downright dangerous with a very light trigger pull. Using our triggers, a competent pistolsmith can adjust the trigger pull to safely meet your shooting needs. For carry or competition, you can't beat Wilson Combat triggers.

Specifications:
Pad Length - .500"
Pad Height - .905"

Package Includes: Trigger, 6-32 x 5/16" Set Screw, 1/16" Allen Wrench

UPC	874218000011
MSRP	$16.95
Description	Competition Match
Finish / Color	Silver
Manufacturer Part#	1
Model	1911
Type	Trigger

Please Login / Register to Ask a Question

It's hard to believe but there are no questions for this product.

RIA 1911..

No problems dropping in on the 1911 A1 done the work myself with no issue

By Richard Davis on 04/30/14

rock island 1911..

so I did this with new springs, sear, disconnector and commander hammer and also hi rise beavertail, everything was complete drop in on my RIA, brought my pull down to about 2 lbs id say, this was my 1st 1911 and I was able to get all this in no fitting required<once I learned how to dis and re assemble my gun> would recommend to anyone with an RIA. perfect fit

By tyler on 02/13/14

Great UpGrade to Gov. Model Rock Island Auto .45..

One of the 1st of many upgrades. Installation was a Drop in. With a replacement Hammer & Sear a VERY good Trigger Job was accomplished.

By Steve I. Cottrill on 01/11/14

the match trigger works like champ..

installed on my para took a little tweaking,but works like a champ,adds to the look of the gun, thanks wilson combat.

By bob on 10/16/13

Good Deal!..

Dropped right into my Rock Island GI Compact. A huge improvement over the factory trigger at a great price.

By Karl on 10/04/13

Ok..

Needed to remove material from top, bottom and both sides of trigger pad to fit my colt. Looks good after polishing, but should have gone with ultralight....pin holes are visible.

By James on 08/28/13

Trigger..

Great product. Dropped right into my full size RIA and combined with a new sear spring from WC gave me a great smooth trigger pull. Thanks Wilson Combat!

By Chuck Norris on 08/03/13

Great Product!! Llama Max-1 c/f..

Bought this item for my 1911 clone made in 99 by llama, all I used was 400 grit SP and a 320 grit SP sponge to smooth. Took 3-4 hours playing it safe. Got a great deal on this pistol and wilson combat has every part I need to restore it!! Thanks a ton!! Ill be back soon. Very recommended!!

By Graig Henderson on 12/13/12

Great product!..

Came in perfect condition, took it out of the bag and dropped it straight in. Great addition to my 1911.

By Wesley Phillips on 09/08/12

Great trigger..

Installed this trigger in My Charles Daly Compact mod. Required some file and polish work , no problem. now has perfect fit and smooth as glass!

By Jim on 03/15/12

Not bad..

The rear frame on mine was bent a little bit when I received it but it straightened right up and installed perfectly.

By Tim on 11/11/11

Trigger..

I bought this trigger for a new ATI 1911 GI. It looks much better than the black trigger that come on it and has a good crisp pull. For the price you cant go wrong, just buy it, youll like it!

By Eddie B. on 09/07/11

para usa gi expert..

great trigger sharp serrations on trigger face.had minor sanding to do on the sides to fit into my para but didnt take long.installation was very easy...im 15 and it only took me 10 mins to do everything.only thing im not exstatic about is the 2 little pins showing.its not bad but not good either...all around great trigger,easy to adjust. definately recommend it to any one looking for a great but inexpensive upgrade.

By Anonymous on 06/29/11

Fit my ATI commander..

Dropped right in with no problems. Has some slight wiggle but its not too bad. The pad could be a tad shorter to fix the issue.

By DJT on 06/11/11

Wilsons Quality Shines Through..

Just bought this trigger for my 1911 and cant wait to drop it in and give it a go.

By Bruce on 05/24/11

drop in, some play not pretty..

this is alot of bang for the buck, its drop in, but has side to side play, and is ugly with the 2 pins showing..

By Jim Litch on 05/15/11

Upgrade..

I purchased this for my Para GI Expert ESP. It wouldnt fit right in so I sanded down the sides for about 4 minutes and it was a great fit. It also made the trigger more like stainless and looked great. Overall, easy install for me as a beginer.

By Jacob on 05/09/11

OUTSTANDING TRIGGER, SS SPRINGFIELD GI..

INSTALLED THIS TRIGGER WITH RECOMMENDED SEAR AND VALUE LINE HAMMER AND BEAVERTAIL SAFETY.TRIGGER FIT PERFECT AFTER A COUPLE OF PASSES WITH A FINE FILE AND A QUICK BUFF.TOTALLY PERFECTED THE GUNS ACCURACY AND TRIGGER PULL.ALSO TRIGGER BOW WAS DAMAGED DURING SHIPPING AND WILSON SENT OUT A NEW PART AT NO CHARGE TO ME WHICH I RECEIVED THE NEXT DAY.THANKS WILSON COMBAT. YOU ROCK!

By CHUCK BAILEY on 03/18/11

love it..

Not exactly a drop in on my Auto Ordnance 1911, but nothing a little filing and patience couldntt fix, the finished product looks great and feels even better. Thanks Wilson

By conner on 12/22/10

easy to fit..

This piece did not drop in. I used some very fine sandpaper to fit. The pad was too wide to drop into my Colt 1991A1 govt model. It took about 3-5 minutes to sand and fit. No expertise required, a little time, patience and common sense and this part works wonderfully.

By Joe on 11/06/10

a true drop in part..

Installed this in my Rock Island Gov. Pulled out of package and dropped right in w/ no fitting! feels great and looks awesome! great part thanks Wilson!

By Matt Allard on 10/01/10

Wilson Combat Competition Match Trigger, Long Pad

OUT OF STOCK - -

Wilson Combat Competition Match Trigger, Long Pad

It's hard to believe but there are no questions for this product.

RIA 1911..

rock island 1911..

Great UpGrade to Gov. Model Rock Island Auto .45..

the match trigger works like champ..

Good Deal!..

Ok..

Trigger..

Great Product!! Llama Max-1 c/f..

Great product!..

Great trigger..

Not bad..

Trigger..

para usa gi expert..

Fit my ATI commander..

Wilsons Quality Shines Through..

drop in, some play not pretty..

Upgrade..

OUTSTANDING TRIGGER, SS SPRINGFIELD GI..

love it..

easy to fit..

a true drop in part..

Similar Products

Customers Also Viewed

Customers Also Purchased